| FXMQ200MBVE | FXMQ250MBVE | ||||
|---|---|---|---|---|---|
| Dimensions | Unit | Height | Mm | 470 | 470 |
| Width | Mm | 1,380 | 1,380 | ||
| Depth | Mm | 1,100 | 1,100 | ||
| Weight | Unit | kg | 132 | 132 | |
| Casing | Material | Galvanised steel plate | Galvanised steel plate | ||
| Fan | External static pressure - 50Hz | High | Pa | 270 | 270 |
| Refrigerant | Type | R-410A | R-410A | ||
| GWP | 2,087.5 | 2,087.5 | |||
| Piping connections | Liquid | Type | Flare connection | Flare connection | |
| OD | Mm | 9.52 | 9.52 | ||
| Gas | Type | Braze connection | Braze connection | ||
| OD | Mm | 19.1 | 22.2 | ||
| Drain | PS1B | PS1B | |||
| Power supply | Name | VE | VE | ||
| Phase | 1~ | 1~ | |||
| Frequency | Hz | 50 | 50 | ||
| Voltage | V | 220-240 | 220-240 | ||
| Current - 50Hz | Maximum fuse amps (MFA) | A | 16 | 16 | |
| Notes | (1) - Cooling: indoor temp. 27°CDB, 19°CWB; outdoor temp. 35°CDB; equivalent piping length: 7.5m (horizontal) | (1) - Cooling: indoor temp. 27°CDB, 19°CWB; outdoor temp. 35°CDB; equivalent piping length: 7.5m (horizontal) | |||
| (2) - Heating: indoor temp. 20°CDB; outdoor temp. 7°CDB, 6°CWB; equivalent refrigerant piping: 7.5m (horizontal) | (2) - Heating: indoor temp. 20°CDB; outdoor temp. 7°CDB, 6°CWB; equivalent refrigerant piping: 7.5m (horizontal) | ||||
| (3) - Capacities are net, including a deduction for cooling (an addition for heating) for indoor fan motor heat. | (3) - Capacities are net, including a deduction for cooling (an addition for heating) for indoor fan motor heat. | ||||
| (4) - The external static pressure is changeable: change the connectors inside the electrical box, this pressure means: High static pressure - Standard | (4) - The external static pressure is changeable: change the connectors inside the electrical box, this pressure means: High static pressure - Standard | ||||
| (5) - The air filter is not a standard accessory, but please mount it in the duct system of the suction side. Select its colorimetric method (gravity method) 50% or more. | (5) - The air filter is not a standard accessory, but please mount it in the duct system of the suction side. Select its colorimetric method (gravity method) 50% or more. | ||||
| (6) - Sound pressure levels are measured at 220V. | (6) - Sound pressure levels are measured at 220V. | ||||
| (7) - Sound values are measured in an anechoic room. | (7) - Sound values are measured in an anechoic room. | ||||
| (8) - Operation sound differs with operation and ambient conditions | (8) - Operation sound differs with operation and ambient conditions | ||||
| (9) - Voltage range: units are suitable for use on electrical systems where voltage supplied to unit terminal is not below or above listed range limits. | (9) - Voltage range: units are suitable for use on electrical systems where voltage supplied to unit terminal is not below or above listed range limits. | ||||
| (10) - Maximum allowable voltage range variation between phases is 2%. | (10) - Maximum allowable voltage range variation between phases is 2%. | ||||
| (11) - MCA/MFA: MCA = 1.25 x FLA | (11) - MCA/MFA: MCA = 1.25 x FLA | ||||
| (12) - MFA ≤ 4 x FLA | (12) - MFA ≤ 4 x FLA | ||||
| (13) - Next lower standard fuse rating minimum 15A | (13) - Next lower standard fuse rating minimum 15A | ||||
| (14) - Select wire size based on the value of MCA | (14) - Select wire size based on the value of MCA | ||||
| (15) - Instead of a fuse, use a circuit breaker | (15) - Instead of a fuse, use a circuit breaker | ||||
| (16) - Contains fluorinated greenhouse gases | (16) - Contains fluorinated greenhouse gases | ||||